|
datasheetdetails
|
<< | < | AX-CTX10 - AC Current Transmitter-Voltage Output
|
| |
|
|
The AX-CTX10 Voltage Output Analog Current transmitters are designed for use in any AC current monitoring application in which you are looking to monitor a particular piece of equipment for proper operation. It uses an “Average” current measuring method and should be used in applications where a pure Sinusoidal AC waveform that has very little or no distortion/noise on the conductor being monitored. Applications may include monitoring a resistive type load such as an incandescent light bulb or heating element as well as any single-speed linear load. |
Product Features
| No external supply voltage required
Multiple selectable ranges
| Cost-effective
Din rail mountable
|
Monitored current type
| AC
| Maximum AC voltage
| 600Vac
| Isolation voltage
| 2200Vac
| Operating frequency
| 50 to 600 Hz
| Core style
| Solid core
| Supply voltage
| Induced from monitored conductor (Insulated conductors only)
| Sensor Amperage Range
| Field selectable. (see order codes)
| Output signal
| 0-10VDC (Min 10KOhm load)
| Response time
| <300 ms
| Accuracy
| +/- 1% from 5-100% of selected range
| Electrical connections
| 2 way screw terminal block (Polarity Sensitive)
| Wire size
| 18 to 24 AWG (0.823 mm2 to 0.205 mm2) Copper Wires only
| Aperture size
| 19.05 mm (0.75”)
| Din rail size
| 35mm
| Ambient temperature/humidity
| -15°C to 40°C / 0-95% RH non-condensing
| Storage temperature/humidity
| 5°C to 35°C / 40% to 80% RH non-condensing
| Enclosure material
| PC/ABS (Polycarbonate/ABS Blend)
| Flammability rating
| UL94-V0
| Agency Approvals
| UL/CUL US Listed (UL 508) Ind. Control Equipment , CE, RoHS2, WEEE
| Dimensions/Weight
| 70.11 mmx 84.92 mm x 26.67 mm / 90gms
| Country of origin
| USA
|
| AX-CTX10.pdf / AC Current Transmitter |  |
|
|
|
